13 Measurement Data Memory
222 IDA-3106 Narda
To display and recall data subsets:
1. Select a data set with data subsets (column number > 1) using the rotary
control knob and then press the View Sub-Data Sets softkey.
The data subsets are displayed.
2. Select a data subset using the rotary control knob and press the
Recall Data Set softkey or the OK key.
The data subset is displayed in the form that it was saved. RECALL
on the screen indicates that the data set is a saved data set.
The complete localization is displayed when you switch to the Map
menu.
To delete a data set:
Use the rotary control knob to select a data set to be deleted and press
the Delete Data Set softkey. You cannot delete individual data subsets.
To delete all data sets:
1. Press the Delete Menu softkey.
2. Press the Select All softkey.
3. Press the Delete Selection softkey.
To delete a range of data sets:
1. Press the Delete Menu softkey.
2. Select the range you want to delete using the appropriate softkey
(there are several ways to select a range using the Invert Selection,
Select, Select First and Select Last softkeys.
3. Press the Delete Selection softkey.
Tip: • You can use the softkeys to jump to the previous or next data
subset without having to go back to the Memory menu.
• You can use the softkeys to jump to the previous or next data
subset if several results are saved in one data set.
To Next Page
Loading...
