15 PC Software
236 IDA-3106 Narda
15.1 PC software versions and functions
The PC software IDA Tools is free and is included with the IDA-3106.
It contains the following functions:
• Download measurement data to the PC
• Download screenshots and demodulation recordings to the PC
• Create antenna, cable, and external device configurations as well as
multi-channel tables and measurement routines
• Transfer instrument configurations
• Activate options and update the device software (firmware)
NOTE: The IDA Tools CD additionally includes the latest information (ReadMe), pdf
documents (operating manuals, command references) and further auxiliary
applications.
15.2 Connecting the device to a PC
The device is configured for communication using the USB interface by
default. A suitable cable is included with the device. The IDA Tools PC
software does not support an Ethernet connection.
The IDA operates as a USB slave and can be controlled from a USB host
(PC) by means of the PC software.
You have installed the IDA Tools PC software on your PC.
1. Connect the IDA-3106 and the PC together using the USB cable
supplied.
2. Start the IDA Tools PC software.
The device is detected automatically.
3. If the interface configuration has been changed, set the appropriate
interface on the IDA-3106:
– Open the Settings menu (Main Menu • Settings), select the
Remote Interface command and press OK to confirm.
– Use the rotary control knob to select USB and press the OK key to
confirm the setting.
– or –
– Reset the settings using Main Menu • Settings • Reset Settings.
Further information on connecting the IDA-3106 to the PC is found under
Connecting to the PC on page 240.
To Next Page
Loading...
