NARDA IDA - Page 52

4 Operation and Basic Settings
44 IDA-3106 Narda
4.1.4 Button on antenna handle
The button on the top of the antenna handle only functions in
Direction Finding mode. It has the following functions:
Manual Bearing
 Press the button briefly.
 Hold on > Hold off (toggle function).
 Press and hold down the button.
 Resets the maximum value.
Horizontal Scan
Scan Type Continuous
 Press the button briefly.
 Start Continuous > Stop (toggle function)
 Press and hold down the button.
 Resets the measurement results.
Scan Type Discrete
 Press the button briefly.
 Start & Add Value > Add Value > Add Value > ...
 Press and hold down the button.
 Stop > Resets the measurement results.
Scan Type Discrete with Max Hold
 Press the button briefly.
 Start & Reset Max > Add Value > Reset Max > Add Value > ...
 Press and hold down the button.
 Stop > Resets the measurement results.