5.2 Displaying and editing system settings
Narda IDA-3106 69
To change the settings:
1. Use the rotary control knob to highlight the item and select it by pressing OK.
2. Use the rotary control knob to change the setting and press OK to
confirm the change or press ESC to cancel the changes.
3. Press ESC to return to the Main menu.
RL Search on
Setup
Recall
Search for reference level when a setup is recalled:
• On
• Off
RL Search Type Reference level search type:
• Sensitive: The reference level is selected so that no
saturation occurs in a normal environment.
• Safe: The reference level is selected so that no saturation
occurs even in an environment with extremely variable signal
strengths (multi-frequency environment).
Beep on new
Maximum
Beep when new maximum is detected in the operation modes
Multi-Channel Power and Level Meter:
• Yes
• No
Table 6: Description of device-specific settings(cont.)
Item Description and available options
To Next Page
Loading...
