5 The Main Menu
74 IDA-3106 Narda
To save the network settings:
Main Menu • Settings
Network settings have been changed.
Press the Save Settings softkey.
5.2.6 Resetting all device settings
Main Menu • Settings
Main Menu • Settings • Service Menu
Main Menu • Settings • Network
Main Menu • Setups
All menus
It can be useful to reset the device settings when you have used it for a long
time or it has been used by other persons. The reset can be performed in
different ways and affects the device settings differently. The following
contents are not altered:
• Stored data logger content (measurement results)
• Configuration files (antennas, cables, tables, etc.)
• microSD card contents
Resetting the system settings
All the system settings (i.e. those shown in the Settings menu) are reset to
their factory defaults. The following are not reset, however: Language,
Battery Type, Time Zone, Daylight Saving Time, Magnetic Declination and
Color Scheme.
To reset the system settings:
The Main Menu • Settings menu is open.
Press the Reset Settings softkey.
Resetting the measurement settings
All the measurement settings (i.e. the parameters used in the operating
modes) are reset to their factory defaults. The system settings are not reset.
To reset the measurement settings:
The Main Menu • Setups menu is open.
1. Select Factory Setup using the rotary control knob.
2. Press the OK key.
To Next Page
Loading...
