5 The Main Menu
84 IDA-3106 Narda
Deleting transmitter tables
Main Menu • Settings • Transmitter Table
You can delete transmitter tables separately or all together.
To delete all the transmitter tables:
Press the Delete All Transmitter Tables softkey and press OK to
confirm.
To delete individual transmitter tables:
1. Select a table using the rotary control knob.
2. Press the Delete Transmitter Table softkey and press OK to confirm.
Adding individual frequencies to a Transmitter Table
Spectrum
You can easily add individual transmitter frequencies to a Transmitter Table
in Spectrum mode.
To add individual transmitter frequencies to a Transmitter Table
Spectrum mode is open.
1. Press the Marker softkey, then use the rotary control knob to select the
desired frequency.
2. Press the Extras softkey.
If you have not already done so, you can select the desired Transmitter
Table now.
3. Press the Add Transmitter softkey.
4. Where necessary, adjust the center frequency and channel bandwidth
using the Fcent and CBW softkeys.
5. Press the Save softkey to add the frequency to the Transmitter Table.
To Next Page
Loading...
