Native Instruments MASCHINE MK3 Getting Started

3. Now click the FX icon (in Arrange view) at the left of the effect name in the Plug-in List.
To bypass the effect.
The effect unit does not affect the sound anymore. The effect is grayed out to indicate
that it is now bypassed.
4. To reactivate the bypassed effect, click its FX icon.
Bypassing effects can be very useful when adjusting effect parameters in order to com-
pare the sound with/without an effect. But more than this, bypassing effects is also a
powerful creative tool when playing live!
It's also possible to bypass effects directly from the Mix view. When in Mix view click the small
square at the left of the effect name in the Plug-in List. Click again to reactivate the effect.
For detailed information on Mix view and using effects, please refer the Maschine Man-
ual.
7.2.3.2 Bypassing Effects on the Controller
1. Check that the PLUG-IN button is lit — if not, press it to enter Control mode.
2. Depending on the level (Master, Group or Sound) the effect you want to bypass is located,
do the following:
Effect on Master: Press Button 1 (MASTER).
Applying Effects
Playing with Effects
MASCHINE - Getting Started - 115

Native Instruments MASCHINE MK3 Specifications

General

Brand	Native Instruments
Model	MASCHINE MK3
Category	Recording Equipment
Language	English