Native Instruments MASCHINE MK3 Getting Started

►
Right-click for example the Section slot 2 and click Remove in the context menu.
→
The content of Section slot 2 is removed and all other Sections are moved one Section to
the left. Note that the Section has only been removed from the arrangement but has not
been deleted.
10.2.2.2 Duplicating and Removing Sections using the Controller
To duplicate or remove a Section using your controller:
1. Press SHIFT + SCENE (Section) to access the Arranger view (if you are not already in the
Arranger view).
2. Press and hold SCENE (Section) to enter Section mode (or pin it by pressing SCENE
(Section) + Button 1).
The right display shows the names of your Section slots. Additionally, the selected Sec-
tion slot is highlighted.
3. Press for example pad 2 to select Section slot 2.
4. Press Button 4 (DUPLICATE) to duplicate this Section slot.
⇨ A duplicate of the Section slot is inserted to the right, it contains the same properties and
content (Scene). The existing Section slots are shifted one slot to the right to make way
for the new entry.
Note that the duplicate slot is automatically selected.
5. Press Button 6 (REMOVE) to remove this new Section slot from your arrangement.
Creating an Arrangement
Managing Sections
MASCHINE - Getting Started - 149

Native Instruments MASCHINE MK3 Specifications

General

Brand	Native Instruments
Model	MASCHINE MK3
Category	Recording Equipment
Language	English