Native Instruments MASCHINE MK3 Getting Started

►
Click the Mix view button at the top left of the Arranger to switch between the Arrange
view and the Mix view.
To switch between Arrange view and Mix view of the software from the controller:
►
Press SHIFT + VARIATION (Navigate) then Button 4 (MIXER) to switch between the Ar-
range view and the Mix view in the MASCHINE software.
The Mixer mode on Your Controller
Your controller provides its own Mixer mode, which you can enable independently from the Mix
view in the software:
►
Press the MIXER button to switch your controller to Mixer mode.
For all details on Mixer mode, please refer to the MASCHINE MK3 Manual available from the
Help menu of the software.
Using Advanced Features
The Mix View
MASCHINE - Getting Started - 176

Native Instruments MASCHINE MK3 Specifications

General

Encoders	8 touch-sensitive knobs
Audio Interface	24-bit / 96 kHz
MIDI I/O	1 x MIDI In, 1 x MIDI Out
USB	USB 2.0
Pads	16 x Multi-color Pads, Velocity-Sensitive, Aftertouch
Display	2 full-color screens
Outputs	1/4" TRS Line Outputs, Stereo Headphone Output
Software	Maschine Software
Power Supply	USB bus-powered
Dimensions	320 x 301 x 41 mm
Weight	2.2 kg
System Requirements	Intel Core i5, 4 GB RAM
Inputs	1 x 1/4" TRS Mic Input, 2 x 1/4" TRS Line Inputs