13. Now press SHIFT + Button 4 above the displays so that +PATTERNS is deselected (the
Button must be off, this will be explained in more detail later):
14. Press the 4-D encoder to load the selected entry.
→ The drum kit is loaded into the Group A.
Alternatively, you can use the Knobs under each field at the bottom of the displays to
select the product, the type, sub-type, etc., in order to progressively narrow your search.
For the last step, let’s leave the Browser and get back to the default Control mode of your con-
troller:
►
Press the lit BROWSER button to leave the Browser (the button turns off).
That’s it! You just loaded a drum kit into a Group. It is now ready to be played from the pads,
as you will see in the next section.
The process of loading from the Browser is the same for all kinds of objects: In the
Browser, you choose the desired object (Project, Group, Sound, etc.), you choose either
factory or user content, you optionally select a particular product (or product category),
the desired type, and sub-type(s), then you scroll through the result list and select an
object for loading.
First Steps
Loading a Drum Kit from the Factory Library
MASCHINE - Getting Started - 39
To Next Page
Loading...
