Page 1-4 V10/V7.5/V5/V3.5 Installation and Operation Manual
Issue 3.5 Section 1 General Information
Table 1-3: Glossary of Terms
TERM DESCRIPTION
ADC Analog to Digital Converter
DAB Digital Audio Broadcast. Refers to any mode of digital operation.
DAC Digital to Analog Converter
GUI Graphic User Interface. Also referred to as diagnostic display
throughout this manual.
EEPROM
Electrically Erasable Programmable Read-Only Memory
IBOC In-Band On-Channel. An approach to deliver new digital services
simultaneously with the existing analog broadcast.
Intermediate Power
Amplifier (IPA)
Refers to a module within the transmitter which amplifies the exciter’s
RF output to a level sufficient to drive the final RF amplifiers.
LCD Liquid Crystal Display
LED Light Emitting Diode (also referred to as lamp)
Low Voltage Power
Supply (LVPS)
Refers to a module within the transmitter which provides all of the
necessary rail/supply voltages except for the fan voltage supply.
LPF Low Pass Filter
PS Power Supply
PWB (PCB) Printed Wiring (Circuit) Board
RTC Real Time Clock
SRAM Static Random Access Memory
Switching Power
Supply (SPS)
Refers to a module within the transmitter which supplies voltage to
an RF power module.
UART Universal Asynchronous Receiver-Transmitter
To Next Page
Loading...
