AVIOR-24S ™ CHAPTER 1
Starter Kit
23
NAVIOR-24S ™ Revision V1.00 20.05.2008
Connectors
COM 1
Port “COM 1” is intended for ensuring RS-232 user interface. The type of connector is DB-9F. Port
“COM 1” pin designation is listed in Table I-2. By default, port “COM 1”is adjusted to BINR
protocol, an exchange velocity by default is 19200 baud.
Table I-2 - Port “COM 1” pin designation
Pin Circuit Description
1 - Open
2 TXD Data, transmitted from receiver
3 RXD Data, received by receiver
4 - Open
5 GND Ground
6 - Open
7 - Open
8 - Open
9 - Open
To Next Page
Loading...