AVIOR-24S ™ CHAPTER 1
Starter Kit
24
NAVIOR-24S ™ Revision V1.00 20.05.2008
COM 2
Port “COM 2” is intended for ensuring RS-232 user interface. The type of connector is DB-9F. Port
“COM 2” pin designation is listed in Table I-3. By default, port “COM 2”is adjusted to NMEA-
0183 protocol, an exchange velocity by default is 9600 baud.
Table I-3 - Port “COM 2” pin designation
Pin Circuit Description
1 - Open
2 TXD Data, transmitted from receiver
3 RXD Data, received by receiver
4 - Open
5 GND Ground
6 - Open
7 - Open
8 - Open
9 - Open
To Next Page
Loading...