3-85 Service Level Troubleshooting
Emulation/Software options
Use the Emulation/Software Menu to set the following:
• Receipt synchronization
• Default lines per inch
• Carriage return usage
• Asian mode
• Font type
• Compress pitch
• 48 Character mode
• PDF417 max column print
• Auto reset
• Compatibility top margin
• Emulation mode
• Slip print width option
• Platen wait time
To select the Emulation/Software setting, press the Paper Feed button according the
number of clicks associated to the setting.
Note: Default settings are marked with asterisks (*).
Receipt synchronization
This function allows users to select whether to enable or disable receipt synchronization
printing.
When Receipt Synchronization is enabled (Mode 1 or Mode2), the printer returns the
status for the buffered status command after confirming the start of printing.
The following commands are the buffer status command:
To Next Page
Loading...