D-157 Print Characteristics
Print Zones
This section shows the printable area for the receipt station.
Receipt station
For 80-mm paper
The receipt station centers characters (standard pitch and compressed pitch) and
graphics on a receipt with a width of 27 dots or 80 mm (3.15 inches).
• Standard pitch: 13 x 24 dots in character cell, 44 characters (columns) per line
• Compressed pitch: 10 x 24 dots in character cell, 56 characters (columns) per line
• Double byte character: 24 x 24 dots in character cell, 24 characters (columns) per line
• Graphics: 576 addressable bits
The minimum print line height is 24 dots for characters and 24 dots for graphics. The
standard print line height is 27 dots or 3.38 mm (0.133 inches) for characters (with three
extra dot rows). Refer to the illustration below (not to scale).
To Next Page
Loading...