NCR 7169 - Printing on Forms or Checks

NCR 7169 Multifunction Printer 1-53
Printing on Forms or Checks
There are several types of transactions that require you to insert a form or check into the
printer.
• Credit card transaction. Some credit card transactions may be printed on the receipt
station and not require any forms.
• Multiple-part forms such as credit transactions or merchandise returns
• Electronic funds transfers
• Check printing, such as printing the date, payee, and amount on the check face
• Check endorsement
To print on forms or checks, follow these steps:
1. Position the form or check on the slip table.
a. Insert the top first, with the print side up.
b. Slide the form or check to the right until it aligns with the guide or wall, and
then slide it toward the back until it touches the form stopper.
Note: If the form is extra long, insert it from the side so it can slide over the
form stopper. Then, align it with the guide or wall and with any preset mark
made on the slip table for custom forms.
Note: When the form or check is properly inserted, the green LED on the slip
table turns on. That means that the form has covered the two sensors on the slip
table.