NCR 7169 - What is in the Box; Removing the packing material

NCR 7169 Multifunction Printer 1-7
What is in the Box
The following items are packed in the shipping box:
• Printer enclosed in a plastic bag and foam pack
• Ribbon cassette
• Thermal receipt paper roll
• Cardboard restraint for carriage (behind the Slip front cover)
The following cables may be ordered from other equipment suppliers and are shipped
separately. For more information, refer to Ordering Paper and Supplies on page57.
• Communication cable (from host computer to printer)
• DC power cable
• Remote power supply
• USB plus power cables
• Cash drawer cables (may be ordered from other equipment suppliers)
Removing the packing material
To remove the packing material, follow these steps:
1. Remove the printer from the foam pack and plastic bag.
2. Open the front cover and remove the carriage holder.
3. Remove the ribbon cassette, receipt paper roll, and cables from the foam packing
material.
4. Save all packing materials for future storing, moving, or shipping of the printer.
Caution: Remove the carriage holder before using the printer.
Caution: Do not pick up the printer using the slip table as a handle.