3-89 Service Level Troubleshooting
Set Compress Pitch option
Set Compress Pitch command using the configuration menu.
Caution: Be extremely careful in changing any of the printer settings. This is to avoid
inadvertently changing other settings that might affect the performance of the printer.
• To set the compress pitch, press the Paper Feed button.
Set 48 Character mode
This function allows users to set the 48 Character printing. The selections are OFF or
ON. The end result is to print 48 characters in one line.
• To select a Char 48 column print option, press the Paper Feed button.
Set PDF417 Max Column print
This function allows the users to select the print columns for the PDF417 bar code
printing. The selections are 9 or 14 columns. The end result is the height of the bar code
printing. The default setting is 9 columns.
Note: RS485 does not support this function.
Caution: Be extremely careful in changing any of the printer settings. This is to avoid
inadvertently changing other settings that might affect the performance of the printer.
To Next Page
Loading...