NCR 7169 Multifunction Printer 1-37
Windows 10
To verify the installation of the driver on a Windows 10 system, follow these steps:
1. Open the Device Manager window.
2.
Make sure that the NCR 7167 Receipt/Slip Printer and the EPIC Port are installed.
Note: The NCR 7167 Receipt/Slip Printer is the defined USB VID/PID (Vendor
ID/Product ID) of the NCR Single Station printers (7167 and 7168).
Note: If this information is not listed, then the installation was not successful. You
need to reinstall the drivers.
To Next Page
Loading...