NCR 7169 - Hardware Options; Set USB Type; Set USB Speed

3-93 Service Level Troubleshooting
Hardware Options
Set USBType
Set the USB type using the configuration menu. Select Hardware Options in the
Configuration Menu.
Caution: Be extremely careful in changing any of the printer settings. This is to avoid
inadvertently changing other settings that might affect the performance of the printer.
• To select a USB type, press the Paper Feed button.
Set USBSpeed
Set the USB speed using the configuration menu. Select Hardware Options in the
Configuration Menu.
Caution: Be extremely careful in changing any of the printer settings. This is to avoid
inadvertently changing other settings that might affect the performance of the printer.
• To select a USB speed, press the Paper Feed button.