NCR 7169 - Printing Specifications (Continued)

Printer Specifications A-150
Thermal Receipt Station Slip Station
Paper
Diameter
80 millimeters maximum Not applicable
Paper
Length
83 meters (273 feet) • Without Check Flip Option:
2.67inches(minimum)
• With Check Flip Option:
3.15inches(minimum),
8.74inches(maximum)
Paper Width • 80 millimeters + 0.5
millimeters / -1.2
millimeters (3.15 inches +
0.02 inches/ -0.047 inches)
• 58 millimeters + 0.5
millimeters / -1
millimeters (2.28 inches +
0.02 inches/ -0.039 inches)
• Without Check Flip Option:
2.00inches(minimum),
8.50inches(maximum)
Note: Forms with width of
more than 170mm will be
extended to the left outer side
of the printer.
• With Check Flip Option:
2.75inches(minimum),
3.74inches(maximum)
Paper
Thickness
Not applicable 0.406 millimeters (0.016 inches)
Printable
Area
2.83 inches maximum 3.22 inches maximum