NEC NC3200S - Page 135

4. LCD Menu
135
Turret
Controls the wide converter lens turret (NC-AT02).
← Displays the control item
← Displays the currently selected item with asterisk (*).
← Displays the setting
Manual Manually control the turret.
- Without Anamo: Unuses the turrert.
- With Anamo: Uses the turrert.
Auto Controls the turret automatically when the title is switched.
- Disable : Unuse the turrert in conjunction with the title.
- Enable : Use the turrert in conjunction with the title.
Ref. Select Controls the turret for the selected title.
- Without Anamo: Unuses the turrert.
- With Anamo: Uses the turrert.
Panel Key Lock
The control buttons on your projector are locked to be inoperative.
← Displays the currently selected item with asterisk (*).
← Displays the setting
Lock Enable a lock on the control buttons on your projector.
Unlock Disable the lock on the control buttons.
Note
 When the buttons on the projector’s control panel are locked, press the EXIT button on the
projector for about 10 sec. to unlock them (The key lock setting on the projector becomes
Unlock).