NEC NC3200S - Confirm the Upgrade; Mount the Covers and Lens

5. Steps to upgrade to 4K
169
5.9 Confirm the Upgrade
5.9.1 Mount the Covers and Lens
Mount the cover and lens in the opposite procedure of removing. To mount the covers, refer to
“1.7 Removing the Projector Covers” (page 32) for details. To mount lens refer to “2.5 Mounting
the Pri
mary Lens” (page 83).
[1] Mount the air inlet cover (front side of the projector).
[2] Mount the lens.
[3] Mount the front cover.
[4] Mount the top front cover.
[5] Mount the lens side cover.
[6] Mount the side cover.
[7] Attach the name plate label and serial number label.
Attach the name plate label and the serial number label that are included with the upgrade kit
about the rating label on the side of the projector main unit. Refer to the following diagram for the
positions for attaching the labels.
Name Plate Label
(Included with the upgrade kit)
Serial Number Label
(Included with the upgrade kit)
NC3200S Name Plate Label NC3200S Serial Number Label