NEC NC3200S - IP Address; Setup Date; Option Status

4. LCD Menu
149
4.5.6 IP Address
Displays the IP address set in the projector head.
←Selects the item to display the IP address.
←Displays the IP address.
System Displays the IP address set for the projector head (System).
4.5.7 Setup Date
Displays the date when the projector was setup (starting date of the warranty period).
The setup date is configured by using DCC for S2. Refer to “Digital Cinema Communicator for S2
Installation Manual” for details.
← Displays the date when the projector was set up (starting
date of the warranty period).
4.5.8 Option Status
Displays the link status of the device mounted in slot A and slot B (media block, signal input
board, or multi-media switcher) on the projector.
The device name is displayed in ( ) when the projector is in standby or when connection to the
device cannot be confirmed.
← Displays the link status of the device in slot B.
← Displays the link status of the device in slot A.
B Displays the link status of the device in slot B.
- IMB: Image Media block
- SIB: Signal input board
- No Board： No device mounted
A Displays the link status of the device in slot A.
- IMB: Image Media block
- SIB: Signal input board
- MMS: Multi-media switcher
- No Board： No device mounted