NEC NC3200S - Installation

4. LCD Menu
138
4.3.4 Installation
This menu is the service personnel menu. For the using service personnel menu, refer to “4.1.1.
When You Use the Service Personnel Menu” (Page 131).
Option Slot
Configures the devices mounted in slot A and slot B. This menu is active in standby mode only.
← Displays the currently selected item with asterisk (*).
← Displays the setting
IMB Image media block (NC-80MB01)
SIB Signal input board (NC-80LB01/NC-80DS01)
MMS Multi-media switcher (MM3000B)
No Board No device mounted
Note
 The following settings are required when using the multi media switcher (MM3000B).
- “Option Slot” in the Installation menu (this setting)
- “MMS Select” in the Installation menu
Image Orient
Make a selection according to the setup position of your projector and screen.
← Displays the currently selected item with asterisk (*).
← Displays the setting
Normal-F Projection is made from front of the screen.
Normal-R Projection is made from behind the screen