4. LCD Menu
137
3D Connector
Selects the port for 3D video systems used as the control signal input/output for the 3D video
system.
If you select “Not Use”, the GP I/O port is used as the control signal input/output for the 3D
video system. If you select “Use”, the 3D port is used as the signal input for the 3D video
system.
← Displays the currently selected item with asterisk (*).
← Displays the setting
Not Use Does not use the 3D port as the control signal input/output for the 3D
video system (uses the GP I/O port).
Use Uses the 3D port as the control signal input/output for the 3D video
system.
FactoryDefault
Returns the projector main unit settings to the factory default state. You can choose from the
following three types of methods.
• Registered preset buttons and title settings
• Network settings
• All adjustment and setting values
← Select the item to be reset.
← Press the ENTER button to execute resetting
P Button & Title Resets the allocation of preset buttons and all registered titles.
LAN Resets the network settings.
All Resets all adjustment and setting values.
To Next Page
Loading...
