2
Introduction
DLP Cinema Projector Installation and Adjustment NEC Display Solutions, Ltd. Manual (This
document) describes the procedures to install, adjust and maintain the projector
(NC3200/NC3200S-A/NC3240S-A), lamp power supply unit (NC-32PS01/NC-32PS02) and
peripheral devices. For safe and correct installation, adjustment and use of the projector,
carefully read this document before installation.
Refer to the operation manuals of the applicable products for basic operation and remarks of the
projector. This document expects the readers who have basic knowledge about projector
installation. After reading, please keep this document under care of the company which
installed or adjusted the projector.
The product name used in this manual
In this manual, the device name is written as listed below. If the function has difference by
devices, the product name is written in the text.
•NC3200/NC3200S-A/NC3240S-A Projector
•NC-32PS01/NC-32PS02 Lamp power supply
(option for the NC3200 series , and NC3240S series)
• NC-80LB01/NC-80DS01 Signal input board or SIB
• NC-80MB01 Media block or IMB
• MM3000B Multi-media switcher or MMS
• Digital Cinema Communicator for S2 DCC for S2
To Next Page
Loading...
Need help?
General
