NEC SL2100 - Page 101

Program
No.
Program Name Input Data Default
15-13-02 Loop Keys - Incoming Option 0 ~ 50
(0 = Assigns the Loop Key to all
trunk groups,
1 ~ 50 = Assigns the Loop key to
the trunk group specified)
0: Programming Func-
tion Key No. = 01 ~ 24
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-08-17 Class of Service Options (Outgoing Call Service)
- ARS Override of Trunk Access Map
0 = Off
1 = On
COS 01 ~ 15 = 0
21-02-01 Trunk Group Routing for Extensions - Route Ta-
ble Number
0 ~ 50
0 = No Setting (Calls will not
route.)
1
26-01-02 Automatic Route Selection (ARS/F-Route) Serv-
ice - Network Outgoing Inter-Digit ARS Time
0 ~ 64800 seconds 30
26-01-03 Automatic Route Selection (ARS/F-Route) Serv-
ice - ARS Misdialed Number Handling
0 = Route to Trunk Group 1
1 = Play Warning Tone to Dialer
0
26-02-07 Dial Analysis Table for ARS/LCR -
Network Specified Parameter Table
0 ~ 16 0
26-11-01 Transit Network ID Table - Transit Network ID
(Carrier ID)
0000 ~ 9999
(Fixed four digits or No Setting)
Table No. 1 ~ 4 = No
Setting
44-01-01 System Options for ARS/F-Route - ARS/F-Route
Time Schedule
0 = Not Used
1 = Used
0
44-02-01 Dial Analysis Table for ARS/F-Route Access - Di-
al
Up to eight digits
(Use line key 1 for a Don’t Care
digit, @)
No Setting
44-02-02 Dial Analysis Table for ARS/F-Route Access -
Service Type
0 = No setting (None)
1 = Extension Call (Own)
2 = ARS/F-Route Table (F-
Route)
3 = Dial Extension Analyze Table
(Option)
0
44-02-03 Dial Analysis Table for ARS/F-Route Access -
Additional Data
1 = Delete Digit = 0 ~ 255 (255 =
Delete All Digits)
2 = 0 ~ 100 (0 = No Setting)
3 = Dial Extension Analyze Table
Number = 0 ~ 4 (0 = No Setting)
0
44-02-04 Dial Analysis Table for ARS/F-Route Access - Di-
al Tone Simulation
0 = Off
1 = On
0
44-03-01 Dial Analysis Extension Table - Dial Up to 36 digits
Digits = 1 ~ 9, 0,
*
, #, @
(Press Line Key 1 for wild char-
acter @)
No Setting
44-03-02 Dial Analysis Extension Table - ARS/F-Route Se-
lect Table Number
0 ~ 100 (ARS/F-Route Table
Number)
With Program 44-01 set to 0,
Program 44-05 is checked.
With Program 44-01 set to 1,
Program 44-04 is checked.
0
44-03-03 Dial Analysis Extension Table - ARS/F-Route Se-
lect Table Number
0 ~ 100 (ARS/F-Route Table
Number)
With Program 44-01 set to 0,
Program 44-05 is checked.
With Program 44-01 set to 1,
Program 44-04 is checked.
0
44-03-04 Dial Analysis Extension Table - Next Table Area
Number
0 ~ 4 0
44-04-01 ARS/F-Route Selection for Time Schedule -
ARS/F-Route Table Number
0 ~ 100
(0 = No Service)
0
ISSUE 1.0 SL2100
Features and Specifications Manual 1-87
A