Program
No.
Program Name Input Data Default
11-11-47 Service Code Setup (for Setup/Entry Operation) -
Set/Cancel Call Forward No Answer (Split)
0~9,
, # Maximum of 8 digit 684
11-11-48 Service Code Setup (for Setup/Entry Operation) -
Set/Cancel Call Forward Busy/No Answer (Split)
0~9,
, # Maximum of 8 digit 685
11-11-49 Service Code Setup (for Setup/Entry Operation) -
Set/Cancel Call Forward Both Ring (Split)
0~9,
, # Maximum of 8 digit 686
11-11-52 Service Code Setup (for Setup/Entry Operation) -
Set/Cancel Call Forward All Destination (No
Split)
0~9,
, # Maximum of 8 digit 790
11-11-53 Service Code Setup (for Setup/Entry Operation) -
Set/Cancel Call Forward Busy Destination (No
Split)
0~9,
, # Maximum of 8 digit 791
11-11-54 Service Code Setup (for Setup/Entry Operation) -
Set/Cancel Call Forward No Answer Destination
(No Split)
0~9,
, # Maximum of 8 digit 792
11-11-55 Service Code Setup (for Setup/Entry Operation) -
Call Forward Busy/No Answer Destination (No
Split)
0~9,
, # Maximum of 8 digit 793
14-01-13 Basic Trunk Data Setup - Trunk-to-Trunk Trans-
fer
0 = Disable (No)
1 = Enable (Yes)
1
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-09-01 Class of Service Options (Incoming Call Service)
- Second Call for DID/DISA/DIL/E&M Override
0 = Off (2nd call will not be al-
lowed.)
1 = On (2nd call is allowed.)
COS 01 ~ 15 = 1
20-09-07 Class of Service Options (Incoming Call Service)
- Call Queuing
0 = Off (Calls are not queued.)
1 = On (Calls are queued.)
COS 01 ~ 15 = 0
20-11-12 Class of Service Options (Hold/Transfer Service)
- Call Forwarding Off Premise (External Call For-
warding)
0 = Off
1 = On
COS 01 ~ 15 = 1
20-13-05 Class of Service Options (Supplementary Serv-
ice) - Intercom Off-Hook Signaling
0 = Off (ICM off hook signaling
disabled.)
1 = On (ICM off hook signaling
enabled.)
COS 01 ~ 15 = 1
20-13-06 Class of Service Options (Supplementary Serv-
ice) - Automatic Off-Hook Signaling (Automatic
Override)
0 = Off (manually)
1 = On (automatically)
COS 01 ~ 15 = 1
21-03-01 Trunk Group Routing for Trunks - Route Table
Number
0 ~ 50
(0 = No Setting)
1
24-02-07 System Options for Transfer - Trunk-to-Trunk
Transfer Release Warning Tone
0 ~ 64800 seconds 1800
24-09-01 Call Forward Split Settings -
Call Forwarding Type
0 = Call Forwarding Off
1 = Call Forwarding with Both
Ringing
2 = Call Forward when No An-
swer
3 = Call Forwarding All Calls
4 = Call Forwarding when Busy
or Not Answered
5 = Call Forwarding when Busy
0
SL2100 ISSUE 1.0
1-124
Call Forwarding, Off-Premise
C
To Next Page
Loading...
