Program
No.
Program Name Input Data Default
24-09-02 Call Forward Split Settings -
CO Call Forwarding Destination for Both Ring,
All Call, No Answer
Maximum of 36 digits (0 ~ 9,
,
#, @, P
, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-03 Call Forward Split Settings -
Intercom Call Forwarding Destination for Both
ring, All Call, No Answer
Maximum of 36 digits (0 ~ 9,
,
#, @, P
, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-04 Call Forward Split Settings -
CO Call Forwarding Busy Destination
Maximum of 36 digits (0 ~ 9,
,
#, @, P
, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-05 Call Forward Split Settings -
Intercom Call Forwarding Busy Destination
Maximum of 36 digits (0 ~ 9,
,
#, @, P
, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-06 Call Forward Split Settings -
Call Forwarding Destination for CTX/PBX for All
Call, No Answer
Maximum of 36 digits (0 ~ 9,
,
#, @, P
, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
24-09-07 Call Forward Split Settings -
Call Forwarding Destination for CTX/PBX for
Busy
Maximum of 36 digits (0 ~ 9,
,
#, @, P
, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
25-07-07 System Timers for VRS/DISA - Long Conversa-
tion Warning Tone Time
0 ~ 64800 seconds 1800
25-07-08 System Timers for VRS/DISA - Long Conversa-
tion Disconnect Time
0 ~ 64800 seconds 30
Trunk-to-Trunk Forwarding - Normal (0) Trunks
Program
No.
Program Name Input Data Default
11-10-06 Service Code Setup (for System Administrator) -
Set Trunk to Trunk Transfer per Trunk
0~9,
, # Maximum of 8 digit 733
11-10-07 Service Code Setup (for System Administrator) -
Cancel Trunk to Trunk Transfer per Trunk
0~9,
, # Maximum of 8 digit 734
11-10-08 Service Code Setup (for System Administrator) -
Set Trunk to Trunk Transfer Destination per
Trunk
0~9,
, # Maximum of 8 digit 735
ISSUE 1.0 SL2100
Features and Specifications Manual 1-125
C
To Next Page
Loading...
