NEC SL2100 - Page 142

Program
No.
Program Name Input Data Default
22-11-06 DID Translation Table - Transfer Destination
Number 2
0 = No setting
1 ~ 50 = Incoming Ring Group
101 = Not Used
102 = InMail
103 = Not Used
201 ~ 250 = Department Group
400 = VRS
401 = DISA
501 ~ 599 = DISA(VRS Mes-
sage)
1000-1999 = Common ABB Dial
(000-999)
0
Operation
To activate Call Forwarding Off-Premise non-split:
1. At a Multiline Terminal, press Speaker key.
- OR -
At a Single Line Terminal, lift the handset.
2. Dial the Call Forwarding Service Code.
- OR -
At a Multiline Terminal only, press the Call Forwarding Programmable Function keys (PRG
15-07-01, PRG 15-07-10 ~ PRG 15-07-15 or SC 751 Key Code 10 ~ 15).
3. Dial 1 (Set).
4. Dial the Trunk Access Code (default: 0) + Number (0 + 2142622000).
Trunk access codes are 0 (ARS/Trunk Group Routing), 704 + Line Group (1 ~ 9, 01 ~ 50) or #0 +
Line number (e.g., 05 or 005 for line 5).
Your DND or Call Forwarding (Device) Programmable Function key flashes.
To cancel Call Forwarding Off-Premise non-split:
1. At a Multiline Terminal, press Speaker key.
- OR -
At a Single Line Terminal, lift the handset.
2. Dial the Call Forward Access Code (default not assigned).
3. Dial 0 (Cancel).
To activate Call Forwarding Off-Premise Split:
1. At a Multiline Terminal, press Speaker key.
- OR -
At a Single Line Terminal, lift the handset.
2. Dial the Call Forwarding Service Code.
3. Dial 1 (Set).
4. Dial 1 (Internal) or 0 (External).
5. Dial Trunk Access Code (default: 0) + number (0 + 2142622000).
Trunk access codes are 0 (ARS/Trunk Group Routing), 704 + Line Group (1 ~ 9, 01 ~ 50) or #0 +
Line number (e.g., 05 or 005 for line 5).
Your DND or Call Forwarding (Device) Programmable Function key flashes.
SL2100 ISSUE 1.0
1-128
Call Forwarding, Off-Premise
C