NEC SL2100 - Page 144

7. Repeat from step 3 to define another mode entry or press Speaker key to hang up.
Cancel the Line Forwarding:
1.
Lift the handset.
2. Dial 735.
3. Dial trunk port number (001 ~ 128) to be defined.
4. Select the mode (1 ~ 8) to be defined.
5. Press Exit key.
6. Press Speaker key to hang up.
Automatic Trunk-to-Trunk Transfer (Step Transfer)
(follows the predefined destination in PRG 24-04-01) Set Automatic Trunk Forwarding:
The Speed Dial bin must be defined in PRG 13-04-01 for the line to forward.
1. Lift the handset.
2.
Dial 733.
3. Dial trunk port number to be used (001 ~ 128).
4. Press Speaker key to hang up.
Cancel Automatic Trunk Forwarding:
1. Lift the handset.
2. Dial 734.
3. Dial trunk port number to be used (001 ~ 128).
4. Press Speaker key to hang up.
Department Group Line Forwarding
Method 1
Set the Destination and Forward the Line:
1. Lift the handset.
2. Dial 604.
3. Dial the Department Group number (01 ~ 50) to be defined.
4. Select the time mode (1 ~ 8) to be defined.
5. Enter the telephone number, which is the destination of the forwarded trunk.
The number is stored in the Speed Dial bin number assigned in PRG 24-04-01. This entry overwrites
any existing number defined in the bin.
6. Press Hold
key to accept the entry.
7. Repeat from step 3 to define another time mode entry or press Speaker key to hang up.
Cancel the Line Forwarding:
1. Lift the handset.
2. Dial 604.
3. Dial the Department Group number (01 ~ 50) to be defined.
SL2100 ISSUE 1.0
1-130
Call Forwarding, Off-Premise
C