NEC SL2100 - Page 145

4. Select the time mode (1 ~ 8) to be defined.
5.
Press Exit key.
6. Press Speaker key to hang up.
Method 2 (follows the pre-defined destination in PRG 24-05-01)
Set Automatic Trunk Forwarding:
The Speed Dial bin must be defined in PRG 13-04-01 for the line to forward.
1. Lift the handset.
2.
Dial 602.
3. Dial the Department Group number (01 ~ 50) to be defined.
4. Press Speaker key to hang up.
Cancel Automatic Trunk Forwarding:
1. Lift the handset.
2. Dial 603.
3. Dial the Department Group number (01 ~ 50) to be defined.
4. Press Speaker key to hang up.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-131
C