Analog Trunk
Call to
Station on Inter-
nal Call
N/A 20-09-01 = On
24-09-04 = Off
20-09-01 = Off
20-09-07 = Off
24-09-04 = On
Station on Trunk
Call
N/A 20-09-01 = On
24-09-04 = Off
20-09-01 = Off
20-09-07 = Off
24-09-04 = On
*1. If the internal caller wants to hear Ringing signal rather than the Ring Busy Signal go to PRG 80-01-02 with
PCPro or Web Pro. Using the copy feature copy all the attributes of Service Tone 14 (ICM Ringback) to service
tone 39 (Ring Busy). If the caller wants to hear regular Busy signal, copy all of the attributes of Service Tone 6
(Busy) to Service Tone 39 (Ring Busy).
Camp On
Program
No.
Program Name Input Data Default
11-12-04 Service Code Setup (for Service Access) - Set
Camp-On
0~9,
, # Maximum of 8 digit 750
11-12-05 Service Code Setup (for Service Access) - Can-
cel Camp-On
0~9,
, # Maximum of 8 digit 770
11-16-05 Single Digit Service Code Setup - Camp-On 0~9,
, # Maximum of 1 digit #
15-07-01 Programmable Function Keys 09 = Night Mode Service key Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
20-13-35 Class of Service Options (Supplementary Serv-
ice) - Block Camp On
0 = Off ( Camp On blocked.)
1 = On (Camp On allowed.)
COS 01 ~ 15 = 0
11-11-23 Service Code Setup (for Setup/Entry Operation) -
Second Call for DID/DISA/DIL
0~9,
, # Maximum of 8 digit 679
11-12-47 Service Code Setup (for Service Access) - Call
Waiting Answer/Split Answer
0~9,
, # Maximum of 8 digit 794
15-02-06 Multiline Telephone Basic Data Setup - Hold Key
Operating Mode
0 = Normal (Common)
1 = Exclusive Hold
2 = Park Hold
0
20-01-08 System Options - Trunk Queuing Callback Time 0 ~ 64800 seconds 15
20-01-09 System Options - Callback/Trunk Queuing Can-
cel Time
0 ~ 64800 seconds 64800
20-03-01 System Options for Single Line Telephones - SLT
Call Waiting Answer Mode
0 = Hook Flash (Hooking)
1 = Hook Flash + Service Code
794
0
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
Operation
To Camp-On a busy extension:
1. Call the busy extension.
2. Dial 750 or press the Camp-On key (PRG 15-07 or SC 751: 35).
3. Do not hang up.
To camp-on to a trunk, refer to Trunk Queuing/Camp-On on page 1-849.
SL2100 ISSUE 1.0
1-142
Call Waiting/Camp-On
C
To Next Page
Loading...
