System Availability
Terminals
All Multiline Terminals with a display and Single Line Terminals equipped to receive Caller ID
Required Component(s)
3COIDB-C1
2BRIDB-C1
1PRIDB-C1
Related Features
Abbreviated Dialing/Speed Dial
Automatic Route Selection (ARS/F-Route)
Call Arrival (CAR) Keys
Caller ID Call Return
Conference, Voice Call/Privacy Release
Park
Station Message Detail Recording
InMail
System Caller Log
Guide to Feature Programming
The programs listed below indicate the most commonly used programs required for this feature. The
programs are listed in the order that the installer should follow. Refer to the PCPro wizards for further
detailed programming.
• When a * is listed next to the Program Number it indicates a program that MUST be set (from a
default state) for this feature to be enabled.
Program
No.
Program Name Input Data Default
20-09-02 * Class of Service Options (Incoming Call Service)
- Caller ID Display
0 = Off (Caller ID not displayed.)
1 = On (Caller ID is displayed.)
COS 01 ~ 15 = 1
14-02-10 * Analog Trunk Data Setup - Caller ID 0 = Off (Caller ID not displayed.)
1 = On ( Caller ID is displayed.)
1
15-03-09 Single Line Telephone Basic Data Setup - Caller
ID Function
0 = Disable (Caller ID not dis-
played.)
1 = Enable (Caller ID is dis-
played.)
1
SL2100 ISSUE 1.0
1-152
Caller ID
C
To Next Page
Loading...
