Program
No.
Program Name Input Data Default
14-01-22 Basic Trunk Data Setup - Caller ID to Voice Mail 0 = Disable (Caller ID not sent to
VM.)
1 = Enable (Caller ID is sent to
VM.)
1
14-01-24 Basic Trunk Data Setup - Trunk-to-Trunk Outgo-
ing Caller ID through Mode
0 = Disable (Caller ID not forwar-
ded out.)
1 = Enable (Caller ID is forwar-
ded out.)
0
20-02-08 System Options for Multiline Telephones - LCD
Display Holding Time
0 ~ 64800 seconds 5
10-02-04 Location Setup - Area Code Dial (up to six digits) : 0 ~ 9,
,
#
No Setting
10-02-05 Location Setup - Trunk Access Code Dial (up to eight digits) : 0 ~ 9,
, #
No Setting
10-09-01 DTMF, Dial Tone Detection Setup - DTMF, Dial
Tone Detection
0 = Common use for both analog
extensions and trunks
1 = Use for analog extensions
(DTMF Receivers)
2 = Use for analog trunks (DTMF
receivers/Dial tone detection/
Caller ID detection)
Resource 01 ~ 140 = 0
14-01-20 Basic Trunk Data Setup - Block Outgoing Caller
ID
0 = Prevent (No)
1 = Allow (Yes)
0
14-01-21 Basic Trunk Data Setup - Caller ID Block Code Dial (up to eight digits) 1831
15-02-08 Multiline Telephone Basic Data Setup - Automat-
ic Handsfree
0 = Preselect
1 = One-Touch (Automatic
Handsfree)
1
15-02-40 Multiline Telephone Basic Data Setup - Addition-
al Dial for Caller ID Call Return
Up to four digits (0, 1 ~ 9, #,
) No Setting
15-02-57 Multiline Telephone Basic Data Setup - Caller
Log on busy
0 = Off
1 = On
0
15-03-10 Single Line Telephone Basic Data Setup - Caller
Name
0 = Disable
1 = Enable
1
15-03-11 Single Line Telephone Basic Data Setup - Caller
ID Type
0 = FSK
1 = DTMF
0
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-08-15 Class of Service Options (Outgoing Call Service)
- Block Outgoing Caller ID
0 = Off
1 = On
COS 01 ~ 15 = 0
20-09-04 Class of Service Options (Incoming Call Service)
- Notification for Incoming Call List Existence
0 = Off
1 = On
COS 01 ~ 15 = 0
20-13-06 Class of Service Options (Supplementary Serv-
ice) - Automatic Off-Hook Signaling (Automatic
Override)
0 = Off (manually)
1 = On (automatically)
COS 01 ~ 15 = 1
20-19-01 System Options for Caller ID - Caller ID Display-
ing Format
0 = First 10 digits (Upper)
1 = Last 10 digits (Lower)
0
20-19-05 System Options for Caller ID - Caller ID Sender
Queuing Time (Sender Wait)
0 ~ 64800 seconds 0
20-20-01 Message Setup for Non-Caller ID Data - Private
Call
24 Alphanumeric Characters PRIVATE
20-20-02 Message Setup for Non-Caller ID Data - Call from
Out of Service Area
24 Alphanumeric Characters OUT OF AREA
20-20-03 Message Setup for Non-Caller ID Data - Call In-
formation with Error
24 Alphanumeric Characters NO CALLER INFO
ISSUE 1.0 SL2100
Features and Specifications Manual 1-153
C
To Next Page
Loading...
