Program
No.
Program Name Input Data Default
90-03-01 Save Data - Save Data Dial 1 + press Hold (Press Hold
only to cancel.)
-
90-04-01 Load Data - Load Data Dial 1 + press Hold (Press Hold
only to cancel.)
-
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
Operation
Storing a Number (When set 15-02-60:0)
To store a Caller ID number in a Speed Dial bin:
(Following operation is available for 2W Digital Multiline Terminal/ IP Multiline Terminal Only .)
1. With a Multiline Terminal in an idle condition the display shows:
1-01 FRI 09:00AM
301 STA 301
LIST DIR ICM PROG
2. Press the List softkey.
- OR -
Press the Left Cursor key twice and skip step 3. The display shows:
3. Press the CID softkey (Caller ID). The display shows:
##: xxxxxxxxxxxxx
mm-dd hh:mm
Store DEL
## = List Number
xx = Caller ID number
mm-dd hh:mm = incoming date and time
= Preview List
= Next List
Store = Store in List
DEL = Delete from List
SL2100
ISSUE 1.0
1-154
Caller ID
C
To Next Page
Loading...
