Program
No.
Program Name Input Data Default
16-02-01 * Department Group Assignment for Extensions 1 ~ 50 (Refer to the program-
ming manual for the
default values of all ex-
tensions.)
16-02-02 Department Group Priority Assignment 1 ~ 50 = Department Group
1 ~ 200 = Priority
(Refer to the program-
ming manual for the
default values of all ex-
tensions.)
15-07-01 Programmable Function Keys -
Programmable Function Keys
36 = Step Call
46 = Department Group Log Out
58 = Automatic Transfer at De-
partment Group Call
59 = Delayed Transfer at Depart-
ment Group Call
60 = DND at Department Group
Call
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
24-05-01 Department Group Transfer Target Setup - Speed
Dial Area Number
0 ~ 999 999
24-02-08 System Options for Transfer - Delayed Transfer
Time for all Department Groups
0 ~ 64800 seconds 10
13-04-01 Speed Dialing Number and Name - Number Maximum of 36 digits (0 ~ 9,
,
#, @, P, R)
@ = Wait for Answer Supervision
- ISDN trunks only
P = Pause - Analog Trunk Only
R = Hook flash - Analog Trunk
Only
No Setting
16-03-01 Secondary Department Group Maximum of 8 digits (0 ~ 9,
, #) No Setting
11-16-10 Single Digit Service Code Setup - Department
Group All Ring Mode
0~9,
, # Maximum of 1 digit No Setting
11-11-25 Service Code Setup (for Setup/Entry Operation) -
Automatic Transfer Setup for Each Extension
Group
0~9,
, # Maximum of 8 digit 602
11-11-26 Service Code Setup (for Setup/Entry Operation) -
Automatic Transfer Cancellation for Each Exten-
sion Group
0~9,
, # Maximum of 8 digit 603
11-11-27 Service Code Setup (for Setup/Entry Operation) -
Destination of Automatic Transfer Each Exten-
sion Group
0~9,
, # Maximum of 8 digit 604
11-11-28 Service Code Setup (for Setup/Entry Operation) -
Delayed Transfer for Every Extension Group
0~9,
, # Maximum of 8 digit 605
11-11-29 Service Code Setup (for Setup/Entry Operation) -
Delayed Transfer Cancellation for Each Exten-
sion Group
0~9,
, # Maximum of 8 digit 606
11-12-09 Service Code Setup (for Service Access) -
Change to STG (Department Group) All Ring
0~9,
, # Maximum of 8 digit No Setting
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-09-07 Class of Service Options (Incoming Call Service)
- Call Queuing
0 = Off (Calls are not queued.)
1 = On (Calls are queued.)
COS 01 ~ 15 = 0
20-11-17 Class of Service Options (Hold/Transfer Service)
- Department Group Trunk-to-Trunk Transfer
(Each Telephone Group Transfer)
0 = Off
1 = On
COS 01 ~ 15 = 1
20-13-06 Class of Service Options (Supplementary Serv-
ice) - Automatic Off-Hook Signaling (Automatic
Override)
0 = Off (manually)
1 = On (automatically)
COS 01 ~ 15 = 1
SL2100 ISSUE 1.0
1-232
Department Calling
D
To Next Page
Loading...
