Program
No.
Program Name Input Data Default
47-13-01 InMail Dial Action Tables - Action 0 = UND (Undefined)
1 = TRF (Transfer)
2 = UTRF (Unscreened Transfer)
3 = REC1
4 = REC2
5 = LOGON
6 = Hang Up
7 = GOTO
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
47-13-01 InMail Dial Action Tables - Data Up to 8 digits
(0 ~ 9,
, #)
X = Caller Dialed Digits
I = Ignore Digits
N = No Routing
P = Pause
Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
80-03-01 DTMF Tone Receiver Setup - Detect Level 0 = 0 dBm ~ - 25 dBm
1 = - 5 dBm ~ - 30 dBm
2 = - 10 dBm ~ - 35 dBm
3 = - 15 dBm ~ - 40 dBm
4 = - 20 dBm ~ - 45 dBm
5 = - 25 dBm ~ - 50 dBm
6 = - 30 dBm ~ - 55 dBm
Refer to the Program-
ming Manual for the
default values.
80-04-01 Call Progress Tone Detector Setup - Detection
Level
0 = 0 dBm ~ - 25 dBm
1 = - 5 dBm ~ - 30 dBm
2 = - 10 dBm ~ - 35 dBm
3 = - 15 dBm ~ - 40 dBm
4 = - 20 dBm ~ - 45 dBm
5 = - 25 dBm ~ - 50 dBm
6 = - 30 dBm ~ - 55 dBm
Refer to the Program-
ming Manual for the
default values.
Operation
Calling Your Mailbox
To call your mailbox:
With a Multiline Terminal, your Voice Mail key flashes green and your Message Center keys flash red
when they have messages waiting. If you do not have a Voice Mail key, your Message Waiting LED
flashes instead.
Multiline Terminal
1. Press your Voice Mail key (PRG 15-07 or SC 751 : 01 +
8).
- OR -
Press the Vmsg softkey.
Your mailbox number is normally the same as your extension number. You may optionally dial a co-
worker’s mailbox - or use this procedure to call your mailbox from a co-worker’s telephone.
- OR -
Press Speaker key and dial
8.
2. If requested by Voice Mail, enter your security code.
Ask your Voice Mail system administrator for your security code.
Normally, your Message Waiting (MW) LED goes out (if applicable). If it continues to flash, you have
unanswered Message Waiting requests or a new General Message. See “To check your messages”
below.
ISSUE 1.0 SL2100
Features and Specifications Manual 1-417
I
To Next Page
Loading...
