Single Line Terminal
1. Lift the handset and dial
8.
If you are at a co-worker’s telephone, you can dial the Voice Mail master number and your mailbox
number instead. You can also use this procedure from your own telephone to call a co-worker’s
mailbox.
2. If requested by Voice Mail, enter your security code.
Checking Messages
1. Press the Voice Mail key once.
The voice mail is called.
When there are new messages, the Message Waiting LED on the telephone flashes red.
With this option set, the MSG key can be used as a Voice Mail key for any function [calling voice mail
or transfer call a to voice mail (Hold + MSG + Extension Number), etc.].
Leaving A Message (Multiline Terminal Only)
To leave a message in the mailbox of an unanswered extension (the extension you call can be
busy, in DND or unanswered):
1. Press the Voice Mail key (PRG 15-07 or SC 751: code 77 + InMail pilot).
- OR -
Dial
8.
The Voice Mail System prompts you to leave a message.
Forwarding Calls to Your Mailbox
To activate or cancel Call Forwarding:
1. Press Speaker key (or lift the handset at the Single Line Terminal) and choose from the following
dial access codes:
741 = Call Forward – Immediate (PRG 15-07 or SC 751: code 10)
742 = Call Forward – Busy (PRG 15-07 or SC 751: code 11)
743 = Call Forward – No Answer (PRG 15-07 or SC 751: code 12)
744 = Call Forward – Busy/No Answer (PRG 15-07 or SC 751: code 13)
2. Dial the Voice Mail master number.
3. Press Speaker key to hang up (or hang up handset at the Single Line Terminal).
Transferring Calls to a Mailbox
To transfer your active call to a mailbox:
Multiline Terminal
1. Press Hold key.
2. Press the Voice Mail key (PRG 15-07 or SC 751: code 77 + InMail pilot).
SL2100
ISSUE 1.0
1-418
InMail
I
To Next Page
Loading...
