EasyManua.ls Logo

NEC SL2100 - Page 525

NEC SL2100
978 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VAD can negotiate by SIP using G.711 or G.729.
VBD is supported on the VoIPDB.
VBD on SIP is only supported on SLT terminal.
When modem signal is detected during a talking, a Codec is changed to VBD Codec.
VBD supports G.711/G.729 (PCMU/PCMA) codec.
The selection of mode (FAX or VBD) is per terminal.
Fax Connection may not work properly when it is in VBD Mode.
VBD supports the one way switching from Voice session to VBD. VBD to Voice session is not
supported. when VBD session is done, the session will be closed.
VBD feature is not dependent on Carrier Type (PRG 10-29-14).
VBD only supports only when the analog terminal and SIP Trunk is connected to a same system.
When changed into VBD codec, VoIPDB cancels VAD and Echo canceller automatically.
When use the FAX path through mode (PRG 84-33-01=2), same FAX codec type must be set on
both end systems. If the codec does not match, the FAX call would be failed. Supported FAX codec
is G.711, and G.726.
To make FAX call, PRG 15-03-03 has to set "1 = Special Terminal" and PRG 15-03-18: "0 = Fax".
SIP Multi Profiles must be configured with unique SIP Port numbers per profile. i.e. Profile 1 could
use the default SIP port 5060 and Profile 2 could be configured to use 5062.
SIP Multi Profile carrier configurations must be reachable through the same IP gateway. i.e. the
default gateway in PRG 10-12-03 must be able to route traffic to the carrier configured in Profile 1
and also be able to route traffic to the System Interconnection configured in Profile 2.
SIP Multi Profile carrier configurations must be reachable through the same DNS server settings.
For SIP Multi Profile programming areas you will now require an index selection as to whether
Profile 1 to Profile 6 is to be configured.
PRG Name Note
10-28 SIP System Information Setup Index added. Select from Profile 1 to Profile 6.
10-29 SIP Server Information Setup Index added. Select from Profile 1 to Profile 6.
10-36 SIP Trunk Registration Information Index added. Select from Profile 1 to Profile 6.
15-16 SIP Register ID Setup for Extension Index added. Select from Profile 1 to Profile 6.
21-19 IP Trunk (SIP) Calling Party Number Setup for
Extensions
Index added. Select from Profile 1 to Profile 6.
84-13 SIP Trunk CODEC Information Setup Index added. Select from Profile 1 to Profile 6.
84-14 SIP Trunk Information Basic Setup Index added. Select from Profile 1 to Profile 6.
84-31 VoIPDB Echo Canceller Setup Index added. Select from Profile 1 to Profile 6.
84-33 FAX over IP Setup Index added. Select from Profile 1 to Profile 6.
84-34 VoIPDB DTMF Setup Index added. Select from Profile 1 to Profile 6.
84-38 VoIPDB Network Side Echo Canceller Index added. Select from Profile 1 to Profile 6.
84-39 SIP Trunk Message Customization Index added. Select from Profile 1 to Profile 6.
Default Settings
None
ISSUE 1.0
SL2100
Features and Specifications Manual 1-511
I

Table of Contents

Other manuals for NEC SL2100

Related product manuals