NEC SL2100 - Page 526

System Availability
Terminals
All Multiline Terminals
Required Component(s)
SL2100 IP TRUNK-01 LIC (License Code 5001)
CPU with VoIPDB installed
Related Features
None
Guide to Feature Programming
Program
No.
Program Name Input Data Default
10-02-01 Location Setup - Country Code Dial (up to four digits) : 0 ~ 9,
*
, #
61
10-02-02 Location Setup - International Access Code Dial (up to four digits) : 0 ~ 9,
*
, #
00
10-02-03 Location Setup - Other Area Access Code Dial (up to two digits) : 0 ~ 9,
*
,
#
0
10-12-03 CPU Network Setup - Default Gateway 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
10-12-05 CPU Network Setup - NIC Interface 0 = Auto Detect
1 = 100Mbps, Full Duplex
2 = 100Mbps, Half Duplex
3 = 10Mbps, Full Duplex
4 = 10Mbps, Half Duplex
0
10-12-07 CPU Network Setup - NAPT Router IP Ad-
dress(Default Gateway [WAN])
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
10-12-08 CPU Network Setup - ICMP Redirect 0= NO, Signaling packets will fol-
low the ICMP redirect message.
1= YES, Signaling packets will
NOT follow the ICMP redirect
message.
0
10-12-09 CPU Network Setup - IP Address (VoIPDB) 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
172.16.0.10
SL2100 ISSUE 1.0
1-512
IP Trunk - (SIP) Session Initiation Protocol
I