System Availability
Terminals
All Stations
Required Component(s)
None
Related Features
Automatic Route Selection (ARS/F-Route)
Repeat Redial
Save Number Dialed
Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-12-12 Service Code Setup (for Service Access) - Last
Number Dial
0~9,
, # Maximum of 8 digit #5
11-12-17 Service Code Setup (for Service Access) - Clear
Last Number Dialing Data
0~9,
, # Maximum of 8 digit 776
15-02-13 Multiline Telephone Basic Data Setup - Redial
List Mode
0 = ICM/Trunk (Extension/Trunk
Mode)
1 = Trunk Mode
0
20-08-05 Class of Service Options (Outgoing Call Service)
- Dial Number Preview (Preset Dial)
0 = Off
1 = On
COS 01 ~ 15 = 1
Operation
To redial your last call (When set PRG 15-02-60:0):
1. Without lifting the handset, press the Redial key.
The last dialed number is displayed.
2. To redial the last number, dial #.
- OR -
Search for the desired number from the Redial List by pressing the Redial or VOLUME or
key.
- OR -
Press the Left Cursor key once and the VOLUME or key to find number.
3. Lift the handset or press Speaker key to place the call.
The system automatically selects a trunk from the same group as your original call and dials the last
number dialed.
- OR -
SL2100
ISSUE 1.0
1-552
Last Number Redial
L
To Next Page
Loading...
