Operation
Automatic Software Check and Update
1. Automatic Update Check
For automatic update check, do the required network settings including DNS so that "Software
Maintenance Server" is reachable with its FQDN.
The "Automatic Update Check" time is read only under PRG 90-36 as shown in figure. This is
system specific and fixed.
SL2100 checks the
software update to the
server at 2:33 AM on
the 8th of each month
After checking, if a newer software is available on the server then a message "There is newer
version available" is displayed on Home and Software update page as shown in figure.
If the installed software is latest then following message is displayed on the software update
page.
SL2100
ISSUE 1.0
1-582
Maintenance - Automatic System Update
M
To Next Page
Loading...
