2. Automatic Update
• Do the following settings as mentioned in figure under "Automatic Update" of software update
page. This enables automatic software download along with reboot time.
However this enable the automatic download function but the automatic download time is taken
from PRG 90-36-16/18/19.
SL2100 reboots at 2:45 AM
on Monday to update the
software.
• After doing settings on software update page, click on "Save" button.
The SL2100 starts downloading the software at 2:33AM of 8
th
of each month if a newer
software is available. After downloading the software, webpro displays a message "The update
software is ready" as shown in figure. User can cancel the update by pressing the "Cancel
Update" button.
The SL2100 will reboot at 2:45 AM on Monday and the software will be updated.
ISSUE 1.0
SL2100
Features and Specifications Manual 1-583
M
To Next Page
Loading...
