• One Touch keys programmed for Park Hold Service Code cannot be used to park calls without
using Hold or Transfer.
• Call Park - Step Call is supported in the local system only.
• A parked call cannot be retrieved from Hold Dial Tone (Second dial tone).
• When a call is parked from a virtual extension, the virtual extension is released.
• When parking a call from a virtual extension, PRG 15-02-21 and PRG 15-18-01 must be set to 1.
• Park Group assignment is by the terminal extension, not the virtual extension.
• When a call parked from a virtual extension recalls, it will ring the terminal the virtual extension is
programmed on, not the virtual extension key.
• Park Retrieve is not supported using DISA.
• Mobile Extension can answer a park call by automatically dialing or by manually dialing the answer
park hold service code through a DID Trunk.
Default Settings
Enabled
System Availability
Terminals
All Terminals
Required Component(s)
None
Related Features
Call Arrival (CAR) Keys
Caller ID
Direct Station Selection (DSS) Console
Hold
Programmable Function Keys
Guide to Feature Programming
Program
No.
Program Name Input Data Default
11-12-31 Service Code Setup (for Service Access) - Park
Hold
0~9,
, # Maximum of 8 digit #6
11-12-32 Service Code Setup (for Service Access) - An-
swer for Park Hold
0~9,
, # Maximum of 8 digit
6
11-12-35 Service Code Setup (for Service Access) - Sta-
tion Park Hold
0~9,
, # Maximum of 8 digit 757
ISSUE 1.0 SL2100
Features and Specifications Manual 1-687
P
To Next Page
Loading...
