Program
No.
Program Name Input Data Default
11-16-11 Single Digit Service Code Setup - Station Park
Hold
0~9,
, # Maximum of 1 digit No Setting
15-02-08 Multiline Telephone Basic Data Setup - Automat-
ic Handsfree
0 = Preselect
1 = One-Touch (Automatic
Handsfree)
1
15-07-01 Programmable Function Keys - Refer to the program-
ming manual for the
default values and for
all other available op-
tions in this command.
15-18-01 Virtual Extension Key Enhanced Options - Virtu-
al Extension Key Operation Mode
0 = Release
1 = Land on the key
0
15-18-02 Virtual Extension Key Enhanced Options - Dis-
play mode when placing a call on Virtual Exten-
sion Key
0 = Secondary Extension Name
1 = Actual Station Name
0
20-06-01 Class of Service for Extensions - Class of Serv-
ice for Extensions
1 ~ 15 Extension 101 is Class
15 and other Extension
are Class 1
20-11-19 Class of Service Options (Hold/Transfer Service)
- Hold/Extended Park
0 = Off
1 = On
COS 01 ~ 15 = 0
20-11-24 Class of Service Options (Hold/Transfer Service)
- Trunk Park Hold Mode
0 = Non Exclusive Hold (Off)
1 = Exclusive Hold (On)
COS 01 ~ 15 = 1
20-11-25 Class of Service Options (Hold/Transfer Service)
- Transfer Park Call
0 = Off
1 = On
COS 01 ~ 15 = 1
20-11-26 Class of Service Options (Hold/Transfer Service)
- Station Park Hold mode
0 = Off
1 = On
COS 01 ~ 15 = 0
20-11-27 Class of Service Options (Hold/Transfer Service)
- Call Park Search
0 = Off
1 = On
COS 01 ~ 15 = 1
24-01-02 System Options for Hold - Hold Recall Callback
Time
0 ~ 64800 seconds 0
24-01-06 System Options for Hold - Park Hold Time - Nor-
mal
0 ~ 64800 seconds 90
24-01-07 System Options for Hold - Park Hold Time - Ex-
tended (Recall)
0 ~ 64800 seconds 300
24-03-01 Park Group - Park Group Number 1 ~ 50 1
Operation
To Park a call in a system orbit:
You can Park Intercom or trunk calls.
1. Press the Park key (PRG 15-07 or SC 752:
04 + orbit).
The Park key LED lights.
If you hear busy tone, the orbit is busy. Try another orbit.
2. Use Paging to announce call.
SL2100
ISSUE 1.0
1-688
Park
P
To Next Page
Loading...
