NEC SL2100 - Page 715

• PCPro uses system data to calculate the Power Factor and does not consider if hardware is
installed. If system data shows a hardware, the power factor is calculated even if the hardware is
not actually installed.
Default Settings
None
System Availability
Terminals
None
Required Component(s)
PCPro apilication to use PCPro.
Web Browser to use WebPro.
For requirement check "Condition".
Related Features
None
Guide to Feature Programming
Program
No.
Program Name Input Data Default
10-12-01 CPU Network Setup - IP Address 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
192.168.0.10
10-12-02 CPU Network Setup - Subnet Mask 128.0.0.0 | 192.0.0.0 | 224.0.0.0 |
240.0.0.0 | 248.0.0.0 | 252.0.0.0 |
254.0.0.0 | 255.0.0.0 |
255.128.0.0 | 255.192.0.0 |
255.224.0.0 | 255.240.0.0 |
255.248.0.0 | 255.252.0.0 |
255.254.0.0 | 255.255.0.0 |
255.255.128.0 | 255.255.192.0 |
255.255.224.0 | 255.255.240.0 |
255.255.248.0 | 255.255.252.0 |
255.255.254.0 | 255.255.255.0 |
255.255.255.128 |
255.255.255.192 |
255.255.255.224 |
255.255.255.240 |
255.255.255.248 |
255.255.255.252 |
255.255.255.254 |
255.255.255.255 |
255.255.255.0
10-12-03 CPU Network Setup - Default Gateway 0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0
ISSUE 1.0 SL2100
Features and Specifications Manual 1-701
P