EasyManua.ls Logo

NEC SL2100 - Page 716

NEC SL2100
978 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Program
No.
Program Name Input Data Default
11-15-14 Service Code Setup, Administrative (for Special
Access) - Modem Access
0~9,
*
, # Maximum of 8 digit 740
22-02-01 Incoming Call Trunk Setup - Trunk Service Type 0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = Tie Line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
0
22-07-01 DIL Assignment - Number of Transferring Desti-
nation
Maximum of 8 digits (0 ~ 9,
*
, #) No Setting
90-02-01 Programming Password Setup - User Name Maximum 10 characters Refer to the Program-
ming Manual for the
default values.
90-02-02 Programming Password Setup - Password Up to eight digits Refer to the Program-
ming Manual for the
default values.
90-02-03 Programming Password Setup - User Level 0 = Prohibited User
2 = IN (Installer Level)
3 = SA (System Administrator
Level 1)
4 = SB (System Administrator
Level 2)
5 = UA (User Programming Ad-
minister Mode Level 1)
Refer to the Program-
ming Manual for the
default values.
90-26-01 Program Access Level Setup - Maintenance Lev-
el
Level 1 = MF Level
Level 2 = IN Level
Level 3 = SA Level
Level 4 = SB Level
Refer to the Program-
ming Manual for the
default values.
90-28-01 User Programming Password Setup - Password Fixed four digits 1111
10-62-01 NetBIOS Setting - NetBIOS Mode 0 = Disabled
1 = Enabled
1
10-62-02 NetBIOS Setting - NetBIOS Name Maximum 15 characters SL2100
Operation
None
PCPro and WebPro Comparison
The table below gives a quick feature comparison of PCPro and WebPro.
Feature
Feature Applica-
tion
Comments
PCPro WebPro
Installation Program Y -
SL2100 ISSUE 1.0
1-702
PC Programming
P

Table of Contents

Other manuals for NEC SL2100

Related product manuals