Program
No.
Program Name Input Data Default
82-21-02 Sensor Setup - Sensor Alarm Detect Minimum
Level
1 ~ 255 (5 ms ~ 1275 ms) 24 (120 ms)
82-21-03 Sensor Setup - Sensor Idle Detect Minimum Lev-
el
1 ~ 255 (5 ms ~ 1275 ms) 24 (120 ms)
90-10-01 System Alarm Setup - Alarm type Refer to Programming
Manual
90-10-02 System Alarm Setup - Report 0 = Not Report (No autodial)
1 = Report (autodial)
Refer to the Program-
ming Manual for the
default values.
90-20-11 Traffic Report Data Setup - Security Sensor Dial
Record
0 = Not Recorded
1 = Recorded
1
Operation
Warning Message (Watch Mode)
< Program >
PRG 11-10-20: 616; Record, Erase VRS message SC616.
PRG 11-10-46: 614; Watch message setting
PRG 11-12-63: 717+1/0; Watch Mode Start/Stop.
PRG 15-07-01: Set “
32” to Function key.
PRG 20-44-01:1; Internal paging group, 1
PRG 20-44-02:1; External paging group, 1
PRG 20-44-03:1; VRS message number for watching, 1
PRG 20-44-04:5; Interval time of Watching message, 5 minutes.
PRG 20-47-01:1; Watch mode time pattern, 1
To record Watching message to VRS 001:
1. Press Speaker key + dial 616 + 7 + 001 at terminal.
2. After beep tone, record message.
3. Press Speaker key and finish recording.
Set up Watch mode
1. Press Speaker key + dial 614 at terminal.
2. Dial Internal paging group number, “01”.
3. Dial external paging group number, “1”.
4. Dial Interval time of Watching message, “05”.
5. Dial VRS message number for watching, “001”.
6. After beep tone, record the message.
7. Press Speaker key and finish recording.
To start Watch mode
1. Press Speaker key + dial 717 + 1 at terminal.
- OR -
2. Press the Function key (
32) at Multiline Terminal and the Function key turn on Red.
- OR -
ISSUE 1.0
SL2100
Features and Specifications Manual 1-757
S
To Next Page
Loading...
